Session F.  Force Protection/Survivability

ORAL PRESENTATIONS

3:00-3:10 PM                     Introduction

3:10-3:35 PM                     FO-01 
Using Plasticity Values Determined from Systematic Hardness Indentation Measurements for Predicting Impact Behavior in Structural Ceramics: A New, Simple Screening Technique
James W. McCauley, U.S. Army Research Laboratory; Trevor E. Wilantewicz, Solyndra, Inc.

3:35-4:00 PM                     FO-02 
Continuum Model Simulations and Experiments of Projectile Impact on Woven Fabric
Ethan M. Parsons and Simona Socrate, Massachusetts Institute of Technology; Tusit Weerasooriya, U.S. Army Research Laboratory; Sai Sarva, General Electric Global Research

4:00-4:25 PM                     FO-03 
Dynamic System Response of Truss Panels under High Dynamic Loading through Experimental & Computation Evaluation
Tyrone L. Jones, Rahul Gupta and Matthew Burkins, U.S. Army Research Laboratory; Haydn Wadley, University of Virginia; Yellapu Murty, Cellular Materials International, Inc.

4:25-4:50 PM                     FO-04 
Modeling Blast-related Brain Injury
M. Nyein, A. Jérusalem and R. Radovitzky, Massachusetts Institute of Technology; D. Moore, Walter Reed Army Medical Center; L. Noels, University of Liege

4:50-5:15 PM                     FO-05 
Biomechanical and Biochemical Cellular Response Due to Shock Waves
James Barthel, Samidha Konkar, Georgy Sankin, Pei Zhong, Stefan Zauscher, Eric Darling and Farshid Guilak, Duke University; Chian-Fong Yen and Bryan Cheeseman, U.S. Army Research Laboratory; Bruce LaMattina, U.S. Army Research Office

POSTERS

FP-01
Development and Validation of Eye Injury and Facial Fracture Criteria for the FOCUS Headform
Jill Bisplinghoff, Joseph Cormier and Stefan Duma, Virginia Tech - Wake Forest, Center for Injury Biomechanics; Eric Kennedy, Bucknell University; Paul Depinet, Robert A. Denton, Inc.; Frederick Brozoski, U.S. Army Aeromedical Research Laboratory

FP-02
Rapid Determination of Endospore Viability by Hyperspectral Reflectance following Surface Decontamination
C. M. Reynolds, D. B. Ringelberg, K. L. Foley, J. E. Anderson and J. Edwards, U.S. Army Engineer Research and Development Center

FP-03
Improved Dynamic Strain Hardening in Poly(Urethane Urea) Elastomers for Transparent Armor Applications
Alex J. Hsieh, U.S. Army Research Laboratory; Sai S. Sarva, Institute for Soldier Nanotechnologies, Massachusetts Institute of Technology; Norman Rice, Triton Systems, Inc.

FP-04
Application of Electrokinetic Nanoparticle Migration in the Production of Novel Concrete-based Composites
Sean W. Morefield, Vincent F. Hock, Charles A. Weiss and Philip G. Malone, U.S. Army Engineer Research and Development Center

FP-05
Innovative Multiphase Nanoparticle Composites Developed Using Electrophoresis and Electromigration
S. W. Morefield, B. P. Dipaolo, P. G. Malone, M. K. McInerney and C. A. Weiss, U.S. Army Engineer Research and Development Center

FP-07
Early Systemic Biomarkers of Acute Lung Injury: Application of Multiplex Proteomic Array Technology
Jayasree Nath and Adolph Januszkiewicz, Walter Reed Army Institute of Research

FP-09
Innovative Energy Absorbing Mounting Systems for High Mass Rotorcraft Payloads
William Kong, Chandrashekhar Tiwari, Matthew Hagon, Charles Bakis and Edward Smith, The Pennsylvania State University; Michael Yukish, The Applied Research Laboratory

FP-10
Reactive Silicate Coatings for Protecting and Bonding Reinforcing Steel in Cement-based Composites
S. W. Morefield, V. F. Hock, C. A. Weiss and P. G. Malone, U.S. Army Engineer Research and Development Center; M. L. Koenigstein, Roesch, Inc.

FP-11
Effect of Projectile Type, Size and Impact Velocity on Ballistic Impact Failure Behavior of Trogamid® CX-7323 Nylon
Nicholas Tsantinis and John W. Song, U.S. Army Natick Soldier Research, Development and Engineering Center; Roy Paulson, Paulson Manufacturing Co.

FP-12
Development of New Protective Solutions to Counter Emerging and Adaptive Threats
Michael J. Roth, Nicholas R. Boone, Pamela G. Kinnebrew, James L. Davis and Todd S. Rushing, U.S. Army Engineer Research and Development Center

FP-14
Bacterial Mixture Identification Using Raman and Surface-enhanced Raman Chemical Imaging
Jason Guicheteau, Steven Christesen and Darren Emge, U.S. Army Edgewood Chemical Biological Center; Ashish Tripathi and Rabih Jabbour, Science Applications International Corporation

FP-15
Advancements in Steel for Weight Reduction of P900 Armor Plate
R. A. Howell and J. S. Montgomery, U.S. Army Research Laboratory; D. C. Van Aken, Missouri University for Science and Technology

FP-16
Development of a Novel, Lightweight, Protective Structure to Resist Impulsive, Dynamic Loads
Donald H. Nelson, William F. Heard, Michael J. Roth and Thomas R. Slawson, U.S. Army Engineer Research and Development Center

FP-17
Methodology for Establishing the Mine/IED Resistance Capacity of Vehicle Seats for Crew Protection
R.G. Kargus, T.H. Li and A. Frydman, U.S. Army Research Laboratory; J. Nesta, Dynamic Science, Inc.

FP-18
Advanced Textile Laminates for Chemical Biological Protective Clothing
Eugene Wilusz and Quoc Truong, U.S. Army Natick Soldier Research, Development and Engineering Center; Larry C. Wadsworth and Peter Tsai, University of Tennessee

FP-19
HMMWV Improvements “Monster Garage©” Program
S. Burrell and J. Soltesz, U.S. Army Tank-Automotive Research, Development and Engineering Center